|
|
WBCS3000 Introduction |
WBCS Battery Cycler
System hardware & software was designed
for easy, stable and accurate battery charge/discharge cycler. This system use potentiostat/galvanostat
circuit so you can do electrochemical experiment using WBCS.
WBCS series choose plug-in type module with independent power suppliers
per 8ch substation (WBCS3000L(Le),S,M1,M2) & channel module for high power system has its own power supplier(WBCS3000D,H,HP). Each substation can be used as independent system with
optional Start-up Kit or can be built up
integrated system
|
|
|
|
|
|
|
|
|
Applicaton
Features
System hardware was designed for stable and accurate instrument furthermore for easy
expansion and maintenance. WBCS series choose plug-in type module with independent
power suppliers per 8ch substation (WBCS3000L(Le),S,M1,M2) & channel module for high
power system has its own power supplier(WBCS3000D,H,HP). Each substation can be used
as independent system with optional Stand Alone Kit or can be built up integrated
system as add-on. These give flexibility to users application.
For stable and accurate instrumentation 4 probe type true potentiostat/galvanostat
circuit: WBCS series are designed for battery test(Li battery, Ni-MH, NiCd etc).
- High resolution 16 bit ADC/DAC: WBCS provides 0.0015% f.s resolution in
control and aquisiton both.
- Channel isolation: To prevent any noise from the other channel, each channel
is designed for isolation.
- Multiple current ranges(WBCS3000: 4 ranges): This improves the resolution and
accuracy in control and measurement of current. Auto/manual selection
- Maximum channel No: 128ch
-
WBCS3000Ls/Ls32 (Low current type)
Voltage range: ±5V(Standard), Max. Current: 10mA@5V
-
WBCS3000Le/Le32(Low current type)
Voltage range: -1V to +5V, Max. Current: 100mA@5V
-
WBCS3000Lx32(Low current type)
Voltage range: ±5V(Standard), Max. Current: 1A@-1V to +5V
-
WBCS3000S(standard type)
Voltage range: ±5V(Standard), User can specify the voltage range within <80V Max. Current: Depending on system specification, Max ±5A@±5V
-
WBCS3000M1(Medium power type)
Voltage range: ±5V(Standard), User can specify the voltage range within <80V Max Current: Depending on system specification. Max. 100Watt
-
WBCS3000M2(Medium power type)
Voltage range: ±5V(Standard), User can specify the voltage range within <80V Max Current: Depending on system specification. Max. 200Watt
-
WBCS3000D(Dual channel power type)
Max. Voltage & Max Current: Refer to Power configuration map
-
WBCS3000H8(Medium power type)
Max. Voltage & Max Current: Refer to Power configuration map
-
WBCS3000H12(Medium power type)
Max. Voltage & Max Current: Refer to Power configuration map
-
WBCS3000HP(High Power type)
Max. Voltage & Max Current: Refer to Power configuration map
System Requirment
- Operating system: Windows7/8/10
- Processor: Pentium or above
- VGA: 1024 x 768 or above, True color
- Interface:LAN
- Mouse
- Printer: most printers/plotters supported by Windows. (Color printer/plotter
recommeded)
Options
- Shield Cell cable(1m, 1.5m, 2m, special cable)
- Battery Holder: Easy to mount/demount cell(battery) type Plug-In battery holder
- Auxiliary voltage input plug-in module(8ch): To measure Aux V and Calc V. Voltage ranges are user selection.
- Temperature input plug-in module(8ch)
- Stand Alone Kit(Interface card & cable, Software)
|
|
|
|
|
|
|
|
|
|
|
|