WonATech
   
 

 
Product | Impedance Analyzer
ZIVE BP/MP Series
ZIVE BP2C
Hardware
  • Bi-potentiostat/galvanostat/ZRA
  • Control voltage range: ±10V
  • Current range: 2nA to 2A (20pA & 200pA with gain)
  • Galvanic corrosion test is available.
  •  
       
      응용 분야

    Application

    • Bio-electrochemistry
    • Sensor
    • Corrosion
    • Material testing
    • Battery / Super capacitor
    • Fuel cell
    • Solar cell
    • Other Echem experiments

    Features

    • high quality bi-potentiostat & dual channel potentiostat/galvanostat/impedance analyzer
    • voltage range : ±10V
      - 3measurementvoltageranges
    • current range : 12 ranges
      - 2nA to 2A

      - 20pA & 200pA with gain
    • frequency range : 10uHz ~ 1MHz
    • 14 EIS techniques capability including multisine implementation
    • high speed data sampling time
      - 2usec or 3usec depending on data point number
    • fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation and measurement
    • voltage pulse or current pulse charge/discharge test (GSM,CDMA etc.)
    • sine wave function for ripple simulatin withenergysoftwarepackage&
      pulse plating available
    • internal 542,000 data point storage and continuing experiment regardless of PC failure
    • plug & play channel module type
      - calibration data & hardware maintenance per channel
    • simultaneous 3 auxiliary voltage measurement
    • 3 digital outputs & 2 digital inputs
    • one auxiliary analog output
    • external booster is available. (ZIVE ZE series)
    • inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
    • free software upgrade

    Cell Configuration 1

    Cell Configuration 1

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced software techniques(Included)

    • EIS software package(EIS)
      - Potentiostat EIS
      - Galvanostatic EIS
      - Pseudo galvanostatic EIS
      - OCP* EIS
      - Potentiodynamic PEIS
      - Galvanodynamic GEIS
      - Poteniodynamic HFR
      - Galvanodynamic HFR
      - Galvanostatic HFR monitor
      - Potentiostatic HFR monitor
      - Multisine potentiostatic EIS
      - Multisine galvanostatic EIS
      - Intermittent potentiostatic EIS
      - Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
      change and applies AC sine wave on this potential.


    • Corrosion software package(COR)
      - Tafel(Tafel experiment)
      - Rp(Polarization resistance)
      - RpEc trend
      - PDYN(Potentiodynamic)
      - CYPOL(Cyclic polarization resistance)
      - GDYN(GalvanoDynamic)
      - Reactivation
      - Galvanic corrosion
      - Potentiostatic ECN
      - Galvanostatic ECN
      - ZRA mode ECN
    • Energy software package(BAT)
      a) Battery test technique
      - CC/CV testforcycle life test of lithium battery
      - CC/CC tet forcyclelifetestofNiCd or NiMH battery
      - Discharging test
      - EVS(electrochemical voltage spectroscopy)
      - Variable scan rate CV
      - Potentiostatic IV curve
      - Galvanostatic IV curve
      - Steady state CV
      - PITT(Potentiostatic intermittent titration technique) test
      - GITT(Galvanostatic intermittent titration technique) test
      - Pulse mode is available for GSM & CDMA profile.
      Pulse shape profile can be measured by user's demand.
      b) Control mode
      - Charge : CC, CC-CV, pulse, sine wave
      - Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
      - Time, voltage, current, power, auxV etc.
      - Various battery charge/discharge test is available including
      pulse discharge for GSM, CDMA application
    • Electrochemical analysis software package(EAS)
      a) Step techniques
      - CA(Chronoamperometry)
      - CC(Chronocoulometry)
      - CP(Chronopotentiometry)
      b) Sweep techniques
      - LSV(Linear sweep voltammetry)
      - SDV(Sampled DC voltammetry)
      - Fast CV
      - Fast LSV
      c) Pulsed techniques
      - DPV(Differential pulse voltammetry)
      - SWV(Square wave voltammetry)
      - DPA(Diff.pulse amperometry)
      - NPV(Normal pulse voltammetry)
      - RNPV(Reverse normal pulse voltammetry)
      - DNPV(Differential normal pulse voltammetry)

    Options

    • Power booster

       
     
    WPG Series
    WPG100e
     
    ZIVE SP & PP Series
    ZIVE SP2
     
    ZIVE BP/MP Series
    ZIVE BP2A
     
    ZIVE BP/MP Series
    ZIVE MP2A
     
    ZIVE BP/MP Series
    ZIVE MP2C