WonATech
   
 

 
Product | Impedance Analyzer
ZIVE SP & PP Series
ZIVE SP10
Applicaton
  • Versatile high quality potentiostat/galvanostat/impedance analyzer
  • Control voltage range: ±5V, ±500mV, ±50mV
  • Control current range: 1nA~10A (1nA with gain, 11 ranges)
  •  
       
      응용 분야

    Application

    • Battery/Super capacitor
    • Fuel cell
    • Solar cell
    • Other Echem experiments
    • Impedance(ESR) measurement

    Features

    • high quality potentiostat/galvanostat/impedance analyzer
    • ±5V@10Amp control range
    • current range (11 ranges)
      - 10A to 100pA
      - 1nA with gain
    • frequency range : 10uHz ~ 1MHz
    • built-in FRA : enables EIS tests
    • 14 EIS techniques capability including multisine
    • bipolar pulse capability
    • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
      sine wave function for ripple simulation in battery test package
      & pulse plating available
    • high speed data sampling time
      - 2usec or 3usec depending on data point number
    • fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation & measurement
    • 3 measurement/control voltage ranges &
      11 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless
      of PC failure.
    • LCD display
    • software package
      - Corrosion software package
      - EIS software package
      - Electrochemical analysis software package
      - Energy software package
    • multichannel configuration available by connecting multiple SP10 or other ZIVE products
    • power booster(ZIVE ZB series) available
    • included basic software, Energy(battery)/Impedance/Corrosion/Echem analysis software packages
    • free software upgrade

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced software techniques(Included)

    • EIS software package(EIS)
      - Potentiostat EIS
      - Galvanostatic EIS
      - Pseudo galvanostatic EIS
      - OCP* EIS
      - Potentiodynamic PEIS
      - Galvanodynamic GEIS
      - Poteniodynamic HFR
      - Galvanodynamic HFR
      - Galvanostatic HFR monitor
      - Potentiostatic HFR monitor
      - Multisine potentiostatic EIS
      - Multisine galvanostatic EIS
      - Intermittent potentiostatic EIS
      - Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
      change and applies AC sine wave on this potential.

    • Corrosion software package(COR)
      - Tafel(Tafel experiment)
      - Rp(Polarization resistance)
      - PDYN(Potentiodynamic)
      - CYPOL(Cyclic polarization)
      - GDYN(GalvanoDynamic)
      - Cyclic polarization
      - Ecorr vs. time
      - Galvanic corrosion
      - RpEc trend
      - Reactivation potential
      - Critical pitting potential
      - Potentiostatic ECN
      - Galvanostatic ECN
      - ZRA mode ECN

    • Energy software package(BAT)
      a) Battery test technique
      - CC/CV test for cycle life test of lithium battery
      - CC/CC test for cycle life test of NiCd or NiMH battery
      - Discharging test
      - EVS(electrochemical voltage spectroscopy)
      - Variable scan rate CV
      - Potentiostatic IV curve
      - Galvanostatic IV curve
      - Steady state CV
      - PITT(Potentiostatic intermittent titration technique) test
      - GITT(Galvanostatic intermittent titration technique) test
      - Pulse mode is available for GSM & CDMA profile.
      Pulse shape profile can be measured by user's demand.
      b) Control mode
      - Charge : CC, CC-CV, pulse, sine wave
      - Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
      - Time, voltage, current, power, auxV etc.
      - Various battery charge/discharge test is available including
      pulse discharge for GSM, CDMA application

    • Electrochemical analysis software package(EAS)
      a) Step techniques
      - CA(Chronoamperometry)
      - CC(Chronocoulometry)
      - CP(Chronopotentiometry)
      b) Sweep techniques
      - LSV(Linear sweep voltammetry)
      - SDV(Sampled DC voltammetry)
      - Fast CV
      - Fast LSV
      c) Pulsed techniques
      - DPV(Differential pulse voltammetry)
      - SWV(Square wave voltammetry)
      - DPA(Diff.pulse amperometry)
      - NPV(Normal pulse voltammetry)
      - RNPV(Reverse normal pulse voltammetry)
      - DNPV(Differential normal pulse voltammetry)

    Options

    • Power booster

       
     
    WPG Series
    Mid power type WPG100S (Max 400watt)
     
    WBCS mid power type
    WBCS3000M1
     
    WBCS mid power type
    WBCS3000M2
     
    ZIVE BP/MP Series
    ZIVE MP10