|
폐사에서 취급하고 있는 Voltammetry
Cell에 대하여 정리하였습니다.
전기화학분석용
셀키트(Voltammetry Cell Kit)
voltammetry실험 및
기타 전기화학 분석 실험용 셀키트입니다.
목 차
Voltammetry용 cell stand
|
Model
|
Photo
|
Description
|
|
C3
|
|
-
Manual or remote control of
gas purge/blanket
-
Manual or remote on-off
control of magnetic stirrer
-
Cell lead connects directly
to all BASi potentiostats (other potentiostats may required modification of the
cell lead)
-
Low-volume glass cell vials
(typical volume 3 mL)
-
Mounted cell top compatible
with all BASi solid voltammetric working electrodes and reference
electrodes
-
Open architecture for easy
access to cell
-
"Quick-connect" input gas
line connector
-
Faraday Cage included to
reduce environmental noise (for low current measurements)
-
Optional water-jacketed cell
vial
-
Standard acessories
package:Glassy carbon & platinum working electrodes
-
Ag/AgCl reference electrodes
(+ storage vial)
-
Platinum auxiliary
electrode
-
PK-4 working electrode
polishing kit
-
Standard glass cell vials
(12)
-
Low-volume cell
vials
-
Stir bar
-
Cell lead
clips
-
Gas line tubing
|
|
CS2
|
|
1.Easy to
Operate
2.Remote Controlled Gas Purging and Stirring
3.Stirring Rate Setting - Can be
Adjusted Freely
4.Cutoff the Electrical Noise
5.Working, Reference,
Counter Electrodes Can be Cleaned Up Easily
6.Simple Procedure to Connect Gas
Lines
Catalog No. Description
011235 CS-2 Cell Stand
Size 28(W) x
23(D) x 31(H) cm
Weight 7 kg
Inlet Gas Pressure 5 psi
Catalog No.
011235
Faraday Cage with stir and
purge control
Gas Dispersion Tube
Stirrer Bar
Gas Connection
Tubing
Cables
Installation and Operations Manual
*전극 미포함
|
|
CHI220
|
|
Simple cell
stand
*전극 미포함
|
Simple voltammetry cell kit
|
Model
|
Water
Jacket
|
Photo
|
Description
|
|
SVC3
|
No
|
|
Oxygen-free Voltammetry cell
By using this cell,
researchers can run experiments free from gasificationed steam. Also,
recearchers can get rid of infruelnce of oxygen in the cell by bubbling nitrogen
gas. This cell can be utilized with CS-2 Cell Stand. This features are well
suited for measurements by ultraweak current.
Sample volume: 5-10
mL
|
|
VC3
|
No
|
단종, VC-4로 대체.
|
Voltammetry cells
consist of 4 kinds of products - platinum counter electrode, sample vials,
teflon cap and gas purging tube.
Catalog No. Description
010246 VC-3
Voltammetry cell
Contents
010343 Sample vial(20ml)7pcs
010400 5cm Platinum counter electrode for VC-3
cell
010433 Teflon cap for VC-3
010588 Purging tube
|
|
VC2
|
No
|
단종, SVC-2로 대체.
|
Counter electrode
of Voltammetry cell for VC-2 is exchangable. Teflon-coated cell cap equips
removable teflon-coated woking electrode holder. Sample holders for small amount
measurement are availvable after remove the holder.
Components of VC-2/VC-3
cell can be provided separately. In that case, each sample vials (010343)
includes 10pieces of them per the sales unit.
Catalog No. Description
010341 VC-2 Voltammetry cell
Compoents
010343 Sample
vial(20ml)7pcs
010396 Pt counter electrode for VC-2 cell
010431 Teflon cap
for VC-2
010588 Purging tube
|
|
VC4
|
No
|
|
Capable of
measuring only 2ml of sample volume. Furnished holder
prevents the vial from spilling.
Catalog No. Description
011600 VC-4
Voltammetry cell
Contents
011835 Sample vial(5ml)7pcs
011833 Teflon cap for VC-4
011834 Cell
holder for VC-4
010396 Pt counter electrode for VC-2 cell
010588
Purging tube
|
|
AKSPEKIT
|
Option
|
|
Virtually
Student-Proof
Perfect for the undergraduate lab, our innovative cell design
gives your students a rapid way to set up a voltammetry cell without all that
hassle of polishing electrodes, tending to reference electrodes, and chasing
countless cables around the lab bench.
Incredibly Low Cost
Electrodes
Single use, printed electrode designs are available in quantity
packaging at a fraction of the cost of more traditional electrode designs. Use
them one time and then just throw them away.
Custom Cap and Cable
Our
unique cap design couples an edge card connector with a compact cable connection
(it's actually just like the mini-USB connector on your digital camera). The cap
fits on to everyday, ordinary disposable 20 mL lab vials.
Ideal for Teaching Cyclic
Voltammetry
In an instructional setting, we recommend using our printed
carbon electrodes with a well-behaved, reversible electrochemical
system.
|
|
EuroCell
|
No
|
|
For 50-200
ml.
There are five ports: a 24/40
ground-glass joint, two #7 Ace-Threds, and two 14/20 ground-glass joints. The
central 24/40 ground glass joint supports the cylindrical Working Electrode
(your corrosion sample) in the Sample Holder. The Reference Electrode Bridge
Tube and the Counter Electrode and the Bubbler are all mounted in the
Ace-Threds, which allow them to be adjusted vertically to accommodate a wide
range of sample volumes. The vertical adjustment is also handy to make sure
your Reference Electrode Bridge Tube is placed close to the surface of your
corrosion sample. The Bubbler is contained in the 14/20 joint and has one
position for deaeration and another for blanketing. The standard Counter
Electrode is a graphite rod. It is also possible to use a platinum counter
electrode. A bridge tube containing a platinum counter electrode is available
(Part No. 990-194) to prevent products from the counter electrode from
contacting products from the working electrode. We included an additional
14/20 port for a thermometer or other accessory.
|
Jacket
EuroCell
|
Yes
|
|
For 50-200
ml.
Same set as Eurocell but
having water jacket
The temperature can be
controlled by pumping thermostatted water from a water bath through the
jacket.
|
|
WJ
|
Yes
|
단종
|
Water Jacketed Cell
kit
|
|
AFCELL1
|
No
|
|
Clamp 별도
This
standard 125 mL cell features three 14/20 ground glass necks and two Ace #7
screw-thread openings. The ground glass necks can be used to mount reference and
auxiliary and non-rotating working electrodes.
A complete set of Teflon
stoppers for sealing the cell is included. Replacement stoppers are also
available separately.
Deaeration of the cell contents can be accomplished
using the two Ace #7 screw-thread connections to mount gas inlet/outlet lines.
Alternately, small diameter electrodes may be mounted using one or both
screw-threads.
|
|
BOB CELL
|
No
|
|
Low volume
cell
Dr. Bob's Cell is an
electrochemical cell kit designed for flexibility and convenience. It's built
to handle sample volumes from 1-30
ml. It's
available in both (1) an unjacketed model and (2) a jacketed version to control
the temperature of the electrochemical experiment.
The pear-shaped flask is the
key to handling low volumes. There are five ports: two 14/20 ground-glass
joints and three #7 Ace-Threds. The Working Electrode, the Reference Electrode
Bridge Tube, the Counter Electrode Bridge Tube, and the Bubbler are all
contained in the Ace-Threds, which allow them to be adjusted vertically to
accommodate a wide range of sample volumes. The Bubbler has one position for
deaeration and another for blanketing. The Counter Electrode is a Platinum wire
that is contained in a bridge tube isolated from the sample electrolyte with a
Vycor fit. This arrangement prevents products from the counter electrode
contacting products from the working electrode.
|
|
JACKET
BOB CELL
|
Yes
|
|
Dr.Bob's Cell 's jacketed
version
|
소용량 voltammetry cell
kit
|
Model
|
Photo
|
Description
|
|
MF1065
|
|
Micro volume voltammetry
cell
If you are sample-limited, a
special MicroVolume Voltammetry Cell is available
for sample volumes as
small as 50 μL.
The VC-2 cell shown is modified to include a
glass vessel with a salt bridge,
in the position normally occupied by the
voltammetry working electrode.
The small volume sample is placed in this
glass vessel and a small (MCPE) carbon
paste working electrode is lowered
into the vessel.
The vessel is then placed in a larger vial, together
with the reference and
auxiliary electrodes.
The package includes
the carbon paste electrode, carbon paste, the reference and
auxiliary
electrodes, as well as both glass vessels.
|
|
MF2041
|
|
Low volume cell for C3 cell
stand
Most common cells for electrochemical analysis require
sample volumes of 5-10 mL.
When rare or expensive materials are studied, a
lower volume is desirable.
A low-volume sample cell is available as an
option for the C-3 Cell Stand.
It holds a minimum cell volume of 200
μL.
|
|
MF2040
|
|
Low volume cell
kit
Most common cells for electrochemical analysis require
sample volumes of 5-10 mL.
When rare or expensive materials are studied, a
lower volume is desirable.
|
|
