Application

• Battery/Super capacitor
• Fuel cell
• Solar cell
• Other Echem experiments
• Impedance(ESR) measurement

Features

• high quality potentiostat/galvanostat/impedance analyzer
• ±5V@10Amp control range
• current range (11 ranges)
  - 10A to 100pA
  - 1nA with gain
• frequency range : 10uHz ~ 1MHz
• built-in FRA : enables EIS tests
• 14 EIS techniques capability including multisine
• bipolar pulse capability
• voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
  sine wave function for ripple simulation in battery test package
  & pulse plating available
• high speed data sampling time
  - 2usec or 3usec depending on data point number
• fast sweep mode(5000V/sec with 10mV data sampling)
• iR compensation & measurement
• 3 measurement/control voltage ranges &
  11 measurement/control current ranges
• internal 542,000 data point storage & continuing experiment regardless
  of PC failure.
• LCD display
• software package
  - Corrosion software package
  - EIS software package
  - Electrochemical analysis software package
  - Energy software package
• multichannel configuration available by connecting multiple SP10 or other ZIVE products
• power booster(ZIVE ZB series) available
• included basic software, Energy(battery)/Impedance/Corrosion/Echem analysis software packages
• free software upgrade

Experimental Techniques

Basic techniques

• Potentiostatic
• Galvanostatic
• Double step potentiostatic
• Double step galvanostatic
• OCP measurement
• Potential sweep
• Current sweep
• Cyclic voltammetry
• Fast potential sweep
• Potentiostatic Ru measurement
• Galvanostatic Ru measurement

Advanced software techniques(Included)

• EIS software package(EIS)
  - Potentiostat EIS
  - Galvanostatic EIS
  - Pseudo galvanostatic EIS
  - OCP* EIS
  - Potentiodynamic PEIS
  - Galvanodynamic GEIS
  - Poteniodynamic HFR
  - Galvanodynamic HFR
  - Galvanostatic HFR monitor
  - Potentiostatic HFR monitor
  - Multisine potentiostatic EIS
  - Multisine galvanostatic EIS
  - Intermittent potentiostatic EIS
  - Intermittent galvanostatic EIS
  (*) The system measures open circuit potential before each frequency
  change and applies AC sine wave on this potential.

• Corrosion software package(COR)
  - Tafel(Tafel experiment)
  - Rp(Polarization resistance)
  - PDYN(Potentiodynamic)
  - CYPOL(Cyclic polarization)
  - GDYN(GalvanoDynamic)
  - Cyclic polarization
  - Ecorr vs. time
  - Galvanic corrosion
  - RpEc trend
  - Reactivation potential
  - Critical pitting potential
  - Potentiostatic ECN
  - Galvanostatic ECN
  - ZRA mode ECN
  

• Energy software package(BAT)
  a) Battery test technique
  - CC/CV test for cycle life test of lithium battery
  - CC/CC test for cycle life test of NiCd or NiMH battery
  - Discharging test
  - EVS(electrochemical voltage spectroscopy)
  - Variable scan rate CV
  - Potentiostatic IV curve
  - Galvanostatic IV curve
  - Steady state CV
  - PITT(Potentiostatic intermittent titration technique) test
  - GITT(Galvanostatic intermittent titration technique) test
  - Pulse mode is available for GSM & CDMA profile.
  Pulse shape profile can be measured by user's demand.
  b) Control mode
  - Charge : CC, CC-CV, pulse, sine wave
  - Discharge : CC, CP, CR, pulse, sine wave
  c) Cut-off condition
  - Time, voltage, current, power, auxV etc.
  - Various battery charge/discharge test is available including
  pulse discharge for GSM, CDMA application
  

• Electrochemical analysis software package(EAS)
  a) Step techniques
  - CA(Chronoamperometry)
  - CC(Chronocoulometry)
  - CP(Chronopotentiometry)
  b) Sweep techniques
  - LSV(Linear sweep voltammetry)
  - SDV(Sampled DC voltammetry)
  - Fast CV
  - Fast LSV
  c) Pulsed techniques
  - DPV(Differential pulse voltammetry)
  - SWV(Square wave voltammetry)
  - DPA(Diff.pulse amperometry)
  - NPV(Normal pulse voltammetry)
  - RNPV(Reverse normal pulse voltammetry)
  - DNPV(Differential normal pulse voltammetry)
  

Options

• Power booster