|
|
ZIVE MP2F |
Hardware
High quality multichannel potentiostat/galvanostat/impedance analyzer
Control voltage range: ±10V, ±1V, ±100mV
Control current range: 1nA ~ 1A (1nA with gain, 10 ranges)
Channel expansion is available up to 16 channels
|
|
|
|
|
|
|
|
|
응용 분야
Application
- Sensor
- Corrosion/Coatings
- Electrode
material
- Membrane
- Conducting polymer
- Battery/Super capacitor
- Fuel cell
- Other Echem experiments
Features
- high quality multichannel potentiostat/galvanostat/impedance analyzer
- cell configuration
- two or more working electrodes cell with one reference and one counter
electrode configuration
- multiple working electrodes cell with one reference and one counter
electrode configuration
- voltage range : ±10V
- current range
- 1nA to 1A - 1nA with gain
- frequency range : 10uHz to 1MHz
- standard 4 channel housing system
- fully independent channels with 14 EIS technique capability including multisine
EIS technique at affordable price
- compact design with Smart LCD per channel
- current Interrupt IR measurement
IR compensation available(dynamic, positive feedback)
- independent operation by DSP with FPGA per channel
- built-in FRA in each channel: Impedance measurements
- high speed data sampling time
- 2usec or 3usec depending on data point number
- fast sweep mode(5000V/sec with 10mV data sampling)
- internal 542,000 data point storage and test running regardless of PC failure
- channel expansion is available up to 16 channels via USB hub
- full software packages are included as standard
- Corrosion test software package(COR)
- EIS test software package(EIS)
- Electrochemical analysis software package(EAS)
- Energy software package(BAT)
- voltage pulse or current pulse charge/discharge test(GSM,CDMA etc) and
sine
wave function for ripple simulation in battery test package & pulse plating
available(Bipolar pulse capability)
- external booster (ZIVE ZB series) available
- can use EIS data analysis software, ZMANTM and DC data analysis software IVMANTM without purchasing license code
- free software upgrade
Cell Configuration
Experimental Techniques
Basic techniques
- Potentiostatic
- Galvanostatic
- Double step potentiostatic
- Double step galvanostatic
- OCP measurement
- Potential sweep
- Current sweep
- Cyclic voltammetry
- Fast potential sweep
- Potentiostatic Ru measurement
- Galvanostatic Ru measurement
Advanced Software Package(Included)
- EIS software package(EIS)
- Potentiostat EIS - Galvanostatic EIS - Pseudo galvanostatic EIS - OCP* EIS - Potentiodynamic PEIS - Galvanodynamic GEIS - Poteniodynamic HFR - Galvanodynamic HFR - Potentiostatic HFR monitor - Galvanostatic HFR monitor - Multisine potentiostatic EIS - Multisine galvanostatic EIS - Intermittent potentiostatic EIS - Intermittent galvanostatic EIS (*) The system measures open circuit potential before each frequency change
and applies AC sine wave on this potential.
- Corrosion software package(COR)
- Tafel(Tafel experiment) - Rp(Polarization resistance) - RpEc trend - PDYN(Potentiodynamic) - CYPOL(Cyclic polarization resistance) - GDYN(GalvanoDynamic) - Reactivation - Galvanic corrosion - Potentiostatic ECN - Galvanostatic ECN - ZRA mode ECN
- Energy software package(BAT)
a) Battery test technique - CC/CV testforcycle life test of lithium battery - CC/CC tet forcyclelifetestofNiCd or NiMH battery - Discharging test - EVS(electrochemical voltage spectroscopy) - Variable scan rate CV - Potentiostatic IV curve - Galvanostatic IV curve - Steady state CV - PITT(Potentiostatic intermittent titration technique) test - GITT(Galvanostatic intermittent titration technique) test - Pulse mode is available for GSM & CDMA profile. Pulse shape profile can be measured by user's demand. b) Control mode - Charge : CC, CC-CV, pulse, sine wave - Discharge : CC, CP, CR, pulse, sine wave c) Cut-off condition - Time, voltage, current, power, auxV etc. - Various battery charge/discharge test is available including pulse discharge for GSM, CDMA application
- Electrochemical analysis software package(EAS)
a) Step techniques - CA(Chronoamperometry) - CC(Chronocoulometry) - CP(Chronopotentiometry) b) Sweep techniques - LSV(Linear sweep voltammetry) - SDV(Sampled DC voltammetry) - Fast CV - Fast LSV c) Pulsed techniques - DPV(Differential pulse voltammetry) - SWV(Square wave voltammetry) - DPA(Diff.pulse amperometry) - NPV(Normal pulse voltammetry) - RNPV(Reverse normal pulse voltammetry) - DNPV(Differential normal pulse voltammetry)
Options
|
|
|
|
|
|
|
|
|
|
|
|