WonATech
   
 

 
Product | Impedance Analyzer
ZIVE MP5
Hardware
  • High quality multichannel potentiostat/galvanostat/impedance analyzer
  • Control voltage range: ±10V, ±1V, ±100mV
  • Control current range: 500pA ~ 5A (500pA with gain, 11 ranges)
  • Channel expandable up to 32 channels
  •  
       
      Hardware
     
     

    Power amplifier (CE)

     

      Power

    40Watt

      Compliance voltage

    ±10V

      Max. current

    ±5A within 40Watt

      Control speed selection

    8 ea

      Bandwidth

    1MHz

    Slew rate

    10V/usec

    Potentiostat mode(voltage control)

     

    Voltage control

     

      Control voltage range

    ±10, ±1V, ±100mV

    Voltage resolution

    16 bit per each range

       Voltage accuracy

    ±0.02% fs (gain x1)

       Max. scan range

    ±10V vs. ref. E

    Current measurements

     

       Current range

    11 ranges (auto/manual setting)
    5nA to 5A (500pA with gain)

       Current resolution

    16 bit;
    150uA, 15uA, 1.5uA, 1500nA, 15nA, 1.5nA
    150pA, 15pA, 1.5pA, 150fA, 15fA

       Current accuracy

    ±0.02% f.s.(gain x1) >500nA

    Galvanostat mode(current control)

     

    Current control

     

       Control current range

    max. ±5A
    ± full sacle depending on selected range

       Current resolution

    16 bit;
    150uA, 15uA, 1.5uA, 1500nA, 15nA, 1.5nA
    150pA, 15pA, 1.5pA, 150fA, 15fA

       Current accuracy

    ±0.02% f.s. (gain x1) >500nA f.s.

    Voltage measurements

     

       Voltage range

    10V, 1V, 100mV

       Voltage resolution

    16 bit; 0.3mV, 30uV, 3uV

       Voltage accuracy

    ±0.02% fs (gain x1)

    Electrometer

     

       Max. input voltage

    ±10V

       Input impedance

    2x1013Ω||4.5pF

       Bandwidth

    >22MHz

       CMRR

    >114dB

    EIS(Internal FRA) for system

     

       Frequency range

    10uHz ~ 1MHz

       Frequency accuracy

    <0.01%>

       Frequency resolution

    5000/decade

       Amplitude

    0.1mV ~ 5V rms (potentiostatic)
    0.1 ~ 70% f.s. (galvanostatic)

       Mode

    Static EIS:
    potentiostatic, galvanostatic,
    pseudo-galvanostatic, OCP
    Dynamic EIS:
    potentiodynamic, galvanodynamic
    Fixed frequency impedance:
    potentiostatic, galvanostatic,
    potentiodynamic, galvanodynamic
    Multisine EIS:
    potentiostatic, galvanostatic

    Main system

     

      PC communication    

    USB2.0 high speed

      Line voltage

    100~240VAC, 50/60Hz, 1Amp

      Max. channel number per unit

    8 independent channel per unit

      Max. channel

    32 channels(4 units) expandable per PC

      Size

    448.7x277.3x535.4mm (WxHxD) / 29kg(8ch)

    Software

     

      Max. steps per experiments

    1000

      Shutdown safety limits

    voltage, current, temperatrue etc.

      Max. sampling rate

    2usec or 3usec depending on data point number

      Min. sampling time

    unlimited

      Sampling condition

    time, dv/dt, dI/dt, temperature etc.

    Interface for system

     

      Auxiliary port

     

       - Digital output

    3 (open collector)

       - Digital input

    2 (photo coupler)

       - Auxiliary voltage inputs

    3 analog input: ±10V
    for measurement of WE vs. CE
    CE vs. RE or other signal

       - Analog output

    1 analog output : ±10V
    for stirrer, MFC, RDE etc.

      Misc. port

     

       - Signal generator output

    1 analog output for FRA output or
    waveform generation output

       - Peripheral communication

    12C to control external devices

       - Temperature measurement

    1 K-type thermocouple input

       - Zero resistance ammeter

    5nA ~ 5A ranges

    Channel System

     

      Cell cable

    1 meter shielded type (standard)
    working, reference, counter, working sense

      Control
         DAC

    DSP with FPGA
    2x16bit DAC(50MHz) for bias & scan
    1x16bit DAC(1MHz) for analog output

      Data acquisition
         ADC

    2x16bit ADCs(500kHz) for voltage & current 
    1x16bit ADCs(250kHz) for auxiliary voltage &
    temperature reading

      Calibration

    Automatic

      Filter selection

    4ea(5Hz, 1kHz, 500kHz, 5MHz)

      Scan rate

    0 ~ 200V/sec in common mode
    0 ~ 5000V/sec in fast mode

      LED indicator

    busy, run, potentiostat, galvanostat

      Internal data memory

    542,000 points

      Max. output power

    60Watt per channel

    PC requirement

     

      Operating system

    WindowsXP SP3/7/8/10(32bit/64bit OS)

      PC specification(minimum)

    Pentium4, RAM 1GB or higher

      Display

    1600x900 high color or higher

      USB

    high speed 2.0

    General

     

      Dummy cell

    One external dummy cell included

      Thermocouple

    1.5meter K-type (option)

      Auxiliary cable

    Option

      Misc. cable

    Option

      Impedance analysis software

    ZmanTM

      DC data analysis software

    IVmanTM

    The specifications are subject to change without notice.

       

     

       
     
    WPG Series
    Mid power type WPG100S (Max 400watt)
     
    ZIVE SP & PP Series
    ZIVE SP5
     
    ZIVE SP & PP Series
    ZIVE SP5HC
     
    ZIVE BP/MP Series
    ZIVE MP5H
     
    ZIVE BP/MP Series
    ZIVE MP5HC