원아테크
   
 

 

Product | 단채널/다채널 Potentiostat/Galvanostat/EIS
ZIVE MP5HC (고컴플라이언스전압용)

다채널 potentiostat/galvanostat/impedance analyzer로 부식및 저전해성 물질의 전기화학 실험 등 고 컴플라이언스 전압이 필요한 응용분야에 적용 가능한 제품입니다.  최소 2채널에서 최대 32채널까지 확장 가능하며, 최대 ±10V 전압, 1A 전류 제어,최대 ±40V 컴플라이언스 전압이 가능한 모델입니다.

 
   
  Hardware
>

Power amplifier (CE)

Power

40Watt (40V@1A)

Compliance voltage

±40V

Max. current

±1A

Control speed selection

8 ea

Bandwidth

1MHz

Slew rate

10V/usec

Potentiostat mode(voltage control)

Voltage control

Control voltage range

±10V, ±1V, ±100mV

Voltage resolution

0.0015% f.s.(0.3mV,30uV,3uV)

Voltage accuracy

±1mV ±0.05% of setting

Max. scan range

±10V vs. ref. E

Current measurements

Current range

11 ranges (auto/manual setting)
1nA~1A (100pA with gain)

Current resolution

16 bit;
30uA, 3uA, 300nA, 30nA, 3nA, 300pA,
30pA, 3pA, 300fA, 30fA, 3fA

Current accuracy

±0.05% f.s.(gain x1) >100nA

Galvanostat mode(current control)

Current control

Control current range

max. ±1A
± full sacle depending on selected range

Current resolution

16 bit;
30uA, 3uA, 300nA, 30nA, 3nA, 300pA,
30pA, 3pA, 300fA, 30fA, 3fA

Current accuracy

±0.05% f.s.(gain x1) >100nA

Voltage measurements

Voltage range

±10V, ±1V, ±100mV

Voltage resolution

16 bit; 0.3mV, 30uV, 3uV

Voltage accuracy

±1mV ±0.05% of reading

Electrometer

Max. input voltage

±10V

Input impedance

2x1013Ω||4.5pF

Bandwidth

>22MHz

CMRR

>114dB

EIS(Internal FRA) for system

Frequency range

10uHz~1MHz

Frequency accuracy

100ppm(0.01%)

Frequency resolution

5000/decade

Amplitude

0.1mV~5Vrms(Potentiostatic)
0.1~70% f.s.(Galvanostatic)

Mode

Static EIS:
potentiostatic, galvanostatic,
pseudo-galvanostatic, OCP
Dynamic EIS:
potentiodynamic, galvanodynamic
Fixed frequency impedance:
potentiostatic, galvanostatic,
potentiodynamic, galvanodynamic
Multisine EIS:
potentiostatic, galvanostatic
Intermittent PEIS/GEIS

Main system

PC communication

USB2.0 high speed

Line voltage

100~240VAC, 50/60Hz, 1Amp

Max. channel number per unit

8 independent channel per unit

Max. channel

32 channels(4 units) expandable per PC

Size

448.7x277.3x535.4mm (WxHxD) / 29kg(8ch)

Software

Max. step per experiments

1000

Shutdown safety limits

voltage, current, temperatrue etc.

Max. sampling rate

20kHz(50usec) inburst mode
500kHz(2usec) in fast sweep mode

Min. sampling time

unlimited

Sampling condition

time, dv/dt, dI/dt, temperature etc.

Interface for system

Auxiliary port

- Digital output

3 (open collector)

- Digital input

2 (photo coupler)

- Auxiliary voltage inputs

3 analog input: ±10V
for measurement of WE vs. CE
CE vs. RE or other signal

- Analog output

1 analog output : ±10V
for stirrer, MFC, RDE etc.

Misc.port

- Signal generator output

1 analog output for FRA output or
waveform generation output

- Peripheral communication

12C to control external devices

- Temperature measurement

1 K-type thermocouple input

- Zero resistance ammeter

1nA ~ 1A ranges

Channel System

Cell cable

1 meter shielded type (standard)
working, reference, counter, working sense

Control
DAC

DSP with FPGA
2x16bit DAC(50MHz) for bias & scan
1x16bit DAC(1MHz) for analog output

Data acquisition
ADC

2x16bit ADCs(500kHz) for voltage & current
4x16bit ADCs(250kHz) for auxiliary voltage &
temperature reading

Calibration

Automatic

Filter selection

4ea(5Hz, 1kHz, 500kHz, 5MHz)

Scan rate

0 ~ 200V/sec in common mode
0 ~ 5000V/sec in fast mode

LED indicator

busy, run

Internal data memory

542,000 points

Max. output power

48Watt per channel

PC requirement

Operating system

WindowsXP SP3/7/8/10(32bit/64bit OS)

PC specification(minimum)

Pentium4, RAM 1GB or higher

Display

1600x900 high color or higher

USB

high speed 2.0

General

Dummy cell

One external dummy cell included

Thermocouple

1.5meter K-type (option)

Auxiliary cable

Option

Misc. cable

Option

Impedance analysis software

ZmanTM

DC data analysis software

IVmanTM

The specifications are subject to change without notice.

   
 
WPG Series
중전력형 WPG100S (최대 400와트)
 
WMPG Series
기본형 WMPG1000S
 
WBCS 중전류형
기본형 WBCS3000S
 
ZIVE SP & PP Series
ZIVE SP5 (5A용)
 
홀더및 지그
배터리 지그